SHINY EFFECT

0

With NEARFINISH GLOSS 770

Spray application and Hot Press

The recipe given below is not for promotion of the chemical brands. You may find a number of other chemicals in market to complete this task. The mentioned chemicals are products of NEARCHEM and are for to give you just a right idea.

Garments must be free of any finishing.

Enzymatic bio-polish to eliminate hairiness:

0.5 % NEARSTONE RPN

At 45°C for 30 minutes, rinse.

Water-repellent treatment:

– In bath:

Treat in bath at low liquor ratio:

5 g/l NAIGARD TNPR

At 30°C for 20 minutes, light centrifuge (residual pick-up 100%), dry in tumble dryer at

70°C, cure at 140°C for 10 minutes, check water rep ellence.

Prepare a solution made of:

960 g/l NEARFINISH GLOSS 770

40 g/l KATALIN IBN (add slowly by stirring)

Eventually colour with NEARSTONE pigments,

E.g. for a black add:

1 g/l NEARSTONE BLACK N

For blue denim colour add:

0.2 g/l NEARSTONE NAVY BLUE D-2R

0.05 g/l NEARSTONE GREEN D-GB

Spray 50% on good’s weight, e.g. 300ml of solution for a 600g garment.

– Spray one passage (200ml), smoothen with a damp brush, dry at 50-60°C,

– Spray a second passage (100ml) and brush again.

– Press at 120°C for 5 seconds at 40 kg/cm 2.

– Cure at 140°C for 10 minutes.

Rinse in water, soften with:

2.0% NEARFINISH CF622

Acetic acid pH 5.5, at 40°C for 20 minutes.

The glossy effect will resist domestic washes at 40°C.

Leave A Reply